Agricultural machinery - corrosion protection. (1983)

The field is being plowed for a new crop.

The tractor is driving through the field.

Harvesting grain harvesters.

Hay and straw trowers are working.

Agricultural machinery standing in the open air.

Machine parts that have suffered from corrosion.

Repair of machine parts affected by corrosion.

The engine yard of the dairy farm named after.

Chapaev.

The first rule of corrosion control is the proper storage of equipment.

Immediately after installation for storage, the machines are treated with anticorrosive compounds.

The machines are installed on stands.

All complex and expensive equipment is stored indoors and under canopies.

The main operation when installing for off-season storage is reliable preservation.

The conservation process begins with a thorough car wash.

First, the internal surface of the engine, fuel system, transmission units and hydraulic systems are preserved.

Use the additive Akor.

The mixture is poured into the crankcase and the engine is cranked with the starter when the fuel supply is turned off.

The total scrolling time is 1.5-2.0 minutes.

Before proceeding to the external processing of the machine, it is necessary to remove belts, chains and other parts to be stored in the warehouse.

It is important to protect the knives of cutting machines, hydraulic cylinder rods from corrosion.

Workers close all openings, cracks and surfaces through which moisture can get inside the unit.

Scientists are developing new anticorrosive compounds, for example, protective water-hair dispersion.

Micro-strips can protect various surfaces.

The positive qualities of micro hairs include their density and elasticity.

Scientists check the quality of the developed materials.

To apply the wax composition, a conventional spray gun is used.

Processing of equipment with a microwax.

The consumption of the composition for different types of machines.

The consumption of the composition per unit area.

The coating does not require deconservation.

At the end of the working season, many machines are affected by corrosion.

Samples of lesions.

Swelling of the paint on the affected areas.

Removal of corrosion products by mechanical means.

Laboratory of scientists.

Scientists have developed a rust converter.

V.V. Romanov, Doctor of Chemical Sciences and author of the most effective drug.

During the study, it was found that if a rusty surface is treated with a solution based on phosphoric acid, it reacts with rust, converts it into a durable film, and the surface can be painted without cleaning.

A cartoon explaining the nature of the effects of this drug.

Processing of the machine with a soil converter.

It simultaneously transforms rust and forms a durable paint film.

A day after the treatment, the surface can be painted, and then a wax layer can be applied.

Storage of equipment in closed rooms.

Rostokinsky repair plant.

At the factory, all engines undergo internal and external conservation.

First, the fuel system of the engine is preserved with the help of an Acor additive.

Preservation of the starting engine.

Seal all the holes.

External conservation is carried out after assembly.

Engine passport.

It should indicate the date of conservation, storage conditions.

For the preservation of small metal products, paper impregnated with a special solution is used.

Storage of processed mechanisms.

Panorama of the machine yard.

Alternation of personnel with working agricultural machinery.