Magnetization of the fuel mixture (1985)

Chronicle of the early 20th century - ladies in long dresses and hats riding in an open car, various shots with the first passenger cars, cars on the streets of the city, etc.

Contemporary foreign chronicle in b/w - highways, traffic on the streets of the city, traffic, interchanges, etc.

Toy models of cars are moving on a circular platform.

Paris, evening, lights, a car is moving along the Champs Elysees, in the frame - the Arc de Triomphe (shot from the car).

Evening and night streets of modern foreign cities, in the frame dense traffic, lights, illumination, illuminated advertising, modern buildings, various cars, etc.

Soviet automobile plant - in the frame a workshop of the plant, body parts of passenger cars.

On the conveyor - new VAZ passenger cars.

A cargo platform with new passenger cars moves along rails.

In the frame - a huge barge on the river with a load of new passenger cars.

Various shots of a parking lot with new cars (shot from above).

Cars on the highway.

City streets, traffic.

Close-up - shots of various cars (Soviet and foreign).

Top view of an interchange and a highway in a foreign city, the frame shows heavy traffic, traffic jams, congestion.

A policeman (gendarme) on the road regulates traffic.

Close-up - various shots of car exhaust pipes, smoke, etc.

A foreign city, top view - skyscrapers, city streets, etc. are visible through the smog and smoke.

Panorama of a foreign city in a haze of smog, view of buildings, skyscrapers, an interchange, an overpass.

The frame shows various patent documents in English.

Close-up - a part, a spacer for the carburetor (gasket).

This is a device that magnetizes the fuel mixture.

The device is a gasket with two ring-shaped permanent magnets.

Close-up - a hand takes a gasket, metal paper clips are magnetized to it.

Close-up - a girl's face.

Close-up - a carburetor gasket, a sheet of paper is placed on it, metal shavings fall, under the action of a magnet the shavings take the shape of an inverted figure eight.

The magnetic lines of force must coincide with the direction of movement of the fuel mixture.

The animated picture shows the principle of operation of such a gasket in a car carburetor.

The fuel mixture from the carburetor enters the combustion chamber through ring permanent magnets.

In a magnetic field, the fuel mixture is polarized - heavy hydrocarbons are split into lighter ones, complete combustion of the fuel occurs.

Close-up - a carburetor, a gasket with magnets is installed on it.

The diameter of the holes in the magnets is equal to the diameter of the outlet fuel channels of the carburetor.

A hangar, cars are standing, comparative tests are being carried out on a measuring stand.

Close-up - a magnetic gasket is installed on the carburetor.

A man in a special room with the inscription "Tester" is looking at the monitor.

Close-up - the wheels of a passenger car are spinning.

The engine is warming up, the speedometer is in the frame, the instrument needle is moving.

Close-up - the wheels are spinning.

A man with a screwdriver is adjusting the carburetor, achieving stable operation on an extremely lean mixture.

A mechanic by the open hood, working with the engine, a panorama of the "Tester" room, where the equipment is located that records the instrument readings during testing, an employee nearby is turning the knob on the dashboard, looking at the monitor.

The concentration of carbon monoxide in the exhaust gases is no more than 0.6% (in the frame - instrument readings).

Close-up - a Lada car, a device is connected to the exhaust pipe (in this car, the carburetor does not have a magnetic gasket).

A mechanic by the open hood, watching the engine, a panorama of another employee who is monitoring the instrument readings.

Now the concentration of carbon monoxide is significantly higher (in the frame - instrument readings).

Close-up - a magnetic gasket is installed on the carburetor.

Close-up - the mechanic's face in the workshop.

Panorama of a car engine, in the frame an employee observes the readings of devices during testing.

Different types of magnetic gaskets for the carburetor.

The process of serial production of magnetic gaskets at the plant is shown.

Close-up - hot metal is poured into the mold.

The process of manufacturing ring permanent magnets.

Such magnets are made of magnetically hard materials based on iron, cobalt, nickel (in the frame - different types of magnets).

Magnets in special fireproof chambers.

Thermomagnetic treatment is carried out automatically.

An employee in the data center studies a printout with data.

The work of a special machine is shown - the gasket body is made of diamagnetic alloys.

The frame shows various magnetic gaskets.

Footage of the production process (manufacturing of gaskets) is demonstrated.

The frame shows finished magnetic gaskets for the carburetor.

Close-up - the machine.

Close-up - a measuring device, the arrow is moving.

Close-up - the face of an employee.

Footage of testing a magnetic gasket is shown.

The frame shows a device - a magnetic induction meter.

Magnetic gasket parameters are being measured.

Close-up - a hand on the device, turning the handle.

Magnetic gaskets for the carburetor are being demonstrated.

Close-up - a magnetic gasket.

Nature views, various landscapes, etc. are demonstrated through the holes of the magnetic gasket.